The BlueBoard Programmer DK is a versatile development kit ready to in use in Bluetooth Low Energy or Wi-Fi systems. It includes the ESP32-WROVER-E allowing 2.54 GHz wireless communications.
It is Arduino Uno Revision 3 and Arduino MKR compatible, making it possible to mount 3rd-party shields with ease. It is also possible to mount any mikroE additional board enhancing the system with new powerful features.
The system is powered by USB-C. There is a microUSB included to power the external boards that might be mounted on shield connectors so ESP32 SoC is not affected by an increase of current consumption in the board.
The board integrates the FTDI interface (FT2232H Dual High Speed USB to Multipurpose UART/FIFO IC) that allows not only to only to program the ESP32 SoC, but also to debug the code through Eclipse IDE or similar. Besides, the on-board ESP32 SoC can be disabled in order to mount an external DevKitC and enhance it with debugging features. Please, contact us for more information about setting up ESP32 toolchain with Eclipse IDE.
Besides, this development kit can also be programmed via JTAG or edge connector by using an external FTDI TTL-232R-3V. Buttons to manually set the system in Bootloader mode are included along with an additional button to simplify interrupt input testing to the SoC.
Bluetooth Low Energy and Wi-Fi 2.54 GHz
Arduino UNO rev3 and Arduino MKR compatible connetor
MIKRO-E compatible connector
On-Board FTDI programmer and debugger
Cofinanciado por la Unión Europea